STANDARD M-CODES

-

STANDARD M-CODES

(M-Codes vary from machine to machine)


M00 program stop 
M01 optional stop 
M02 end of program (no rewind) 
M03 spindle CW 
M04 spindle CCW 
M05 spindle stop 
M06 tool change 
M07 mist coolant ON 
M08 flood coolant ON 
M09 flood coolant OFF
M19 spindle orientation ON 
M30 end program (rewind stop)
M98 call sub-program
M99 end sub-program

Comments

Post a Comment

Popular posts from this blog

SHAPER MACHINE: TYPES, PARTS, WORKING

-
Image
  SHAPER MACHINE: TYPES, PARTS, WORKING What is  shaper machine ? and  types of shaper machines  with their parts and working principle. Shaper and Types of Shaper Machines The  shaper machine  is a reciprocating type of machine basically used for producing the horizontal, vertical or flat surfaces. The shaper holds the single point cutting tool in ram and the workpiece is fixed in the table. During the forward stroke, the ram is holding the tool is reciprocating over the workpiece to cut into the required shape.  During the return stroke, No metal is cutting. In the shaper machine, the rotary motion of the drive is converted into the reciprocating motion of the ram holding the tool. Therefore in order to reduce the total machine time, It allows the ram holding the tool should move slower during forwarding cutting stroke and it comes faster in return stroke.  This can be achieved by a mechanism called a  quick return mechanism.  Shaper Machi...
Read more

TYPES OF WELDING JOINTS

-
Image
  TYPES OF WELDING JOINTS What is Welding Joint? Welding is a process that needs patience, detail, and creativity. To perform it successfully, welders should have an understandable knowledge of the various methods and practices used in the industry, also including types of welding joints. A welding joint is referred to an arrangement or configuration of two metal plates that will be fit together. The purposes of welding are infinite, and different processes require different types of welds and joints. According to the American Welding Society (AWS), there are 5 basic additions that are commonly known and applied. These welding joint types are each stands for the needs and forces of different applications. So, let’s discuss them one by one. Types of Welding Joints Following are the 5 main types of welding joints: Butt joint welding Lap joint welding Edge joint welding Tee joint welding Corner joint welding 1. Butt Joint Welding These types of welding joints form when the t...
Read more